Resistivity Resistivity Ross Anderson Category="Electronics"Category="Physical quantity"Electrical resistivity (also known as specific electrical resistance) is a measure indicating how strongly a material opposes the flow of electric current. A low resistivity indicates a material that readily allows the movement of electrons. The SI unit for electrical resistivity is the Ohm Metre.

Definitions

The electrical resistivity of a material is usually defined by :
ρ =  RA
–––
l

where

ρ is the electrical resistivity (measured in ohm metres)
R is the electrical resistance|resistance of a uniform specimen of the material (measured in ohms)
l is the length of the specimen (measured in metres)
A is the cross-sectional area of the specimen (measured in square metres)

Electrical resistivity can also be defined as:

ρ =  E
––
J

where

E is the magnitude of the Electric field (measured in volts per Metre)
J is the magnitude of the Current density (measured in amperes per Square metre)

Finally, electrical resistivity is also defined as the inverse of the conductivity, σ, of the material, or:

ρ =  1
––
σ
.

Typical values

Typical resistivities for various materials at 293 K are shown in the table below:

Material\Resistivity (ohm metres)
Silver1.59 × 10-8
Copper1.7 × 10-8
Gold2.44 × 10-8
Aluminium2.65 × 10-8
Tungsten5.6 × 10-8
Iron1 × 10-7
Steel, Stainless7.2 × 10-7
Platinum1.1 × 10-7
Lead2.2 × 10-7
Nichrome
(A nickel-chromium alloy commonly used in heating elements)		1.50 × 10-6
Carbon3.5 × 10-5
Seawater2.0 × 10-1
Germanium4.6 × 10-1
Silicon6.40 × 102
Pure Water2.5 × 105
Human Skinapproximately 5.0 × 105
Glass1010 to 1014
Hard rubberapproximately 1013
Sulfur1015
Quartz (fused)7.5 × 1017

Temperature dependence

In general, electrical resistivity of metals increases with Temperature, while the resistivity of semiconductors decreases with temperature. As the temperature of a metal is reduced, the resistance usually reduces until it reaches a constant value, known as the residual resistivity. This value depends not only on the type of metal, but on its purity and thermal history. Some materials lose all electrical resistivity at sufficiently low temperatures, due to an effect known as Superconductivity.

An even better approximation of the temperature dependence of the resistivity of a semiconductor is given by the Steinhart-Hart equation:

1/T = A + B ln(R) + C ( ln(R)) 3

where A, B and C are the so-called Steinhart-Hart coefficients.

This equation is used to calibrate thermistors.

See also

External links